Just opened a container of ice cream and within a few spoonsful I managed to drip it on my shirt. What, you think I would let a moose walk on me? Where would I find one? Anyway, the ice cream was very
chocolate I mean good.
I’m still refining the design for the Mid-Bucket. Now that I have decided to use the rack out of the minivan I need a place to mount it where it won’t interfere with the suspension but still line up with the steering wheel, and if the mount could do a couple more things like hold the radiator, hold the shocks and springs, and keep the body panels straight… that would be one busy steering rack bracket. Well mission accomplished. The crossmember that holds the steering rack will be integrated into the spring mount and body mounts, for a more rigid structure and better handling. And less weight.
The crossmember sits in front of the front axle leaving enough room for the axle to move up and down with the steering rack suspended above the axle and the drag link going between the axle and the tie rod. A nice compact arrangement, that gets as much of the moving parts of the suspension away from things like gas tanks and body panels and leaves as much room as possible. The radiator mounts to the front of the crossmember and the cooling fans behind the radiator will be protected by the crossmember from the axle. The bellypan will go all the way forward to a splitter, with air going above the splitter ducted to the radiator and what goes below to the rear diffuser to make rear downforce. The splitter will be as wide as the wheel angle at full lock will clear with the side strakes from the splitter blending into the running boards and rear fenders for more downforce over the whole car. This will also clean up the airflow down the sides of the body and give highway gas mileage a tiny boost.
I think I mentioned how finding a 16 X 12 wheel in a 5 X 4.5″ bolt circle was driving me slightly crazy? I’m giving up on maximum grip in favor of sanity. The one (1) wheel I have found in that size and bolt circle is a heavy steel wheel meant for modern-day lead sleds. That leaves me with the 15 X 4 front and 15 X 10 rear option with a rear anti-roll bar for balance between the skinny front and massively wide rears.
And other things are calling me away from the keyboard, so it’s time for Nighty-Knight the dream warrior to take the stage. And if you get that reference you are really weird, and you should give yourself a pat on the back.
Opus the Unkillable