Daily Archives: July 7, 2020

I did stuff yesterday and paid the price today

I went and picked up a copy of GT5 from my local Gamestop. When the steering wheel arrives I’ll be able to do stuff and get my car-driving reflexes back. Also I’ll be able to have some fun with my game system that came with a bunch of games my son like but I don’t. I’m not a fan of first person shooters, and that’s most of the games in the bag. Also not a fan of sidescrolling fighting games like Mortal Combat. But they at least let me get the system up and running and tested to make sure it works.

In other news, my Joyce Smile mask was supposed to be out for delivery last night and never showed up, but the package tracker says it’s still out for delivery so it’s not like they brought it and I wasn’t there to accept it. This annoys me, but on the bright side I found a massage place that I can get to without having to change to another bus. It is slightly more expensive than my regular place, but I can get there in a few minutes from the house so that’s exchanging money for convenience. And the heat index was above 100° while I was out walking around in the sun so I got a bit dehydrated. Not terribly so, but enough to see in my urine which was a bright yellow this morning instead of the normal almost clear in the morning and completely clear the rest of the day.

On the Sprint-T I might have an alternate mounting for the steering box in relation to the radiator. It’s looking like I’ll have room for the box entirely in front of the radiator so from the front it will be axle, tie rod top drag link bottom, steering box, radiator, engine, body. The steering shaft will have to sneak around the radiator a bit, so I think I’ll install a support heim to keep things from flopping around between the steering box U-joint and the steering shaft U-joint or to the home made steering quickener, or the bought steering quickener U-joint.

Another possibility is welding the kit pitman arm and the one I already bought to extend it and basically get double the throw at the same amount of turn input which makes a steering quickener redundant, then mounting the box behind the radiator, so axle, tie rod top drag link bottom, radiator, and steering box, all inside the sides of the nose. This makes things really tidy from the outside, both aerodynamically and visually, and the box could sit in the area behind the electric fan shroud so it doesn’t block the air through the radiator and the extended pitman arm puts the drag link in front of the radiator. This has the advantage of maximum wheel angle, because the internal stops in the box limit the rotation of the shaft holding the pitman arm to just 90° but the extended arm can swing the front wheels much further than that. Basically what would be the next limit would be the tie rod hitting the axle brackets. If I make the extended pitman arm I might not need to use any quickener or maybe a much less aggressive quickener than the 5:1 I was planning on making which changes the 20:1 ratio 5 turn lock-to-lock Vega box only one turn lock to lock. I’ll have to do a calculation to see how much quicker the extended pitman arm makes the steering to see if I need to get a steering quickener or how much if I need to get or make one.

In other news I made a seriously twisty track in GT5 and when I tried to drive it one of the test vehicles was Jeff Gordon’s 2010 Cup car. I can barely keep a street car on that course without a steering wheel controller, there is no way I can finish a lap driving a Cup car. The track is a short and twisty kart track and way too narrow for a Cup car. It was hilarious trying to drive the car with the game controller.