I have been having bad eyes all day along with a runny nose, so I have been doing a lot of thinking about making the Sprint-T harder to steal. Before I started I had “removeable steering wheel” and “hidden start switch” on the list. Now I have “install shifter backwards” and “24 bit binary password” on the list.
Actually the “install shifter backwards” wasn’t intended as an anti-theft measure, I was trying to get the shifter to function like a sequential shifter for a manual transmission. Those function with a pull back to go to a higher gear, but without major mechanical modification having PRN1234 ain’t gonna happen, but 1234NRP is there with just turning the shifter backwards and running the cable through a 180° loop so the cable moves in the right direction even with the shifter in backwards. So, pull the trigger and push the shifter the wrong way until the transmission is in first, then pull back to get to a higher gear. So, people who are familiar with cars would be unable to get the car in gear for at least a few seconds.
Now the other “24 bit binary password” is basically a bunch switches connected so that when the switches are arranged in the correct order it makes a series circuit. I’m thinking I should use the ASCII binary code for R, U, N, 😁 or G, O, !😁 Anyway I need to have a sequence I can remember. The other way to do it is connect the switches to a microcontroller and have it turn on the ECU. Now this can be bypassed by hot wiring, but that requires much longer than what it takes to get police there by cellphone.
And that’s about all I have to say today, so I’ll end this here.