Mrs. the Poet did a number on the stove this week. She was using the self cleaning option and set the timer for 3 hours, because she wanted a CLEAN!! oven. Well, the stove started throwing a F-2 code and beeping, continuously so we had to throw the breaker to get it to quit beeping. The repairman says the stove is so old he can’t get repair parts for it anymore, and the code is for the oven control module because you’re not supposed to run the self clean more than 2 hours because it overheats the control module and can even melt the solder joints. I thought it would be a good idea to pass that along to you guys: Leaving your oven on clean for more than 2 hours can result in a dead stove.
The opening for the stove in the countertop is 297/8” wide meaning we can’t just buy a stove without measuring it, or making a go-no go gauge and making sure it fits with that. The cabinet below the countertop is exactly 30″, so if push came to shove we could strip the formica off the edges of the countertop and go with that, and maybe just slap some paint over the bare wood and call it good. That one I’m leaving up to Mrs. the Poet because the kitchen is her domain. So far I have looked at more than 50 stoves from various manufacturers and it looks like we will need to go to the store and measure before we buy, because some are 30″ “class” and some give exact measurements after the 30″ class…
In other news I’m getting hand cramps again, which is usually an indication I’m not getting enough electrolytes in my hydration or supplements, but I can’t figure out the one I’m missing because I have my salty snacks, for sodium, and yogurt for potassium, but I’m not having the yogurt every day like I used to, so maybe that’s it.
Also, I may have to change how much overhang I have on the track nose to leave room for the engine and radiator, basically figure out where the engine and radiator go and mount the nose as far back as it will fit and just “deal with it”.
And this just in the AC was putting out an error code and it cost $250 to fix it. It was a clogged drain, and the tool from Harbor Freight costs $18 plus tax to fix it but now we know what that code means and that the drain is susceptible to clogging. infinitescreaming.gif pretty much sums up this week.
Witch on a Bicycle 